Smooth outer diameter (continuous surface) – Balance Systems https://www.balancesystems.com Future innovation Thu, 29 Nov 2018 16:07:05 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.21 VM25 https://www.balancesystems.com/product/vm25-modular-multi-function-system/ Mon, 26 Nov 2018 16:00:55 +0000 http://balancesystems.com/product/vm25-modular-multi-function-system/ Modular multi-function system for grinding machine processes The VM25 is a modular fully programmable system designed for high performances applications in grinding machines. It is able to provide solutions for: - One and two plane automatic balancing of the grinding spindle - Touch detection to control the grinding wheel-work piece and grinding wheel-dresser contacts, by using acoustic emission and/or power sensors - In-process and post-process gauging (absolute or comparative)
Features
  • Modular setup fited to the machine architecture on which it is installed
  • It is available in several configurations: table or remote control unit
  • User’s graphic interface based on ISO symbols
  • Total integration with the machine controller (commands and remote programming)
  • TCP/IP connectivity for service operations and remote diagnostic
  • It is delivered with the “VM25 Service” software application for backup, restore and software upgrade
  • Each installed function is fully independent. In case that a function is temporarily not available, it can be disabled and the remaining system can continue to operate
  • A functional upgrade can be made at any time
Benefits
[marked_list2]
  • Ergonomic and easy to setup
  • Decisive in optimizing the production process and the quality of the machine
  • Extends lifetime of the machine components (spindle, grinding wheel and dressing tool), reducing the environmental impact
  • Does not require surveillance
  • Can be installed on any type of grinding machine, both new and retrofitting
[/marked_list2]]]> VM15 https://www.balancesystems.com/product/vm15-single-and-dual-function-system/ Thu, 04 May 2017 12:58:01 +0000 Single and dual-function system for grinding machine processes VM15 is a programmable modular system designed for medium complexity applications in grinding machines, with high performances and cost effective. It is able to provide solutions for: - One-plane balancing of the grinding spindle - Touch detection to control the grinding wheel-work piece and grinding wheel-dresser contact moment, by using acoustic emission and/or power sensors - In-process gauging (comparative)
Features
  • Configuration with control unit in the electrical cabinet and remoted graphic control panel
  • User’s graphic interface based on ISO symbols
  • Each installed function is fully independent. In case that a function is temporarily not available, it can be disabled and the remaining system can continue to operate
  • TCP/IP connectivity for service operations and remote diagnostic
  • It is provided with the software application “VM15 Service” for backup, restore and software upgrade operations
  • A functional upgrade can be made at any time
Benefits
[marked_list2]
  • Ergonomic and easy to setup
  • Decisive in optimizing the production process and the quality of the machine
  • Extends lifetime of the machine components (spindle, grinding wheel and dressing tool), reducing the environmental impact
  • Does not require surveillance
  • Can be installed on any type of grinding machine, both new and retrofitting
[/marked_list2]]]> VM9-GA EASY https://www.balancesystems.com/product/vm9-ga-easy-in-process-gauging-system/ Fri, 25 Sep 2015 09:57:21 +0000 In-Process Gauging System for Grinding Machines VM9GA Easy is an in-process gauging system designed for simple and cost-effective applications. It is available in EASY2 and EASY3 versions. Both versions can measure, in a comparative mode, external diameters on smooth surfaces. Moreover, EASY3 allows the active and passive axial positioning.
Features
[marked_list2]
  • Compact and reliable even in rugged environments
  • Analog display of the dimension, ergonomic keyboard with a selector and 2 buttons
  • 4 commands to control the feed rate (roughing, finishing, dwell, end of cycle)
  • Gauging range from 6 to 74 mm with an accuracy and a repeatability lower than 1 µm
  • Analog output for passive axial positioner (Flag - EASY 3 only)
[/marked_list2]
Benefits
[marked_list2]
  • Makes production stable and consistent with tight tolerances
  • Compensates for the grinding wheel wear
  • Can be implemented in any type of grinding machine, both new and retrofitting
  • Easy to use
  • Does not require surveillance
[/marked_list2]]]> VM9-GA https://www.balancesystems.com/product/vm9-ga-in-process-gauging-amplifier/ Fri, 25 Sep 2015 09:55:08 +0000 http://balancesystems.com/en/prodotto/vm9-ga/ In-process gauging amplifier for grinding machine VM9-GA is a in-process gauging system designed for simple, cost-effective and customized applications. Solutions include gauging of internal, external diameters and thickness both on smooth and on interrupted surfaces.
Features
[marked_list2]
  • Compact and reliable even in rugged environments
  • Analog display of the dimension, ergonomic keyboard with a selector and 2 buttons
  • 4 commands to control the feed rate (roughing, finishing, dwell, end of cycle)
  • Process diagnostics [/marked_list2]
Benefits
[marked_list2]
  • Makes production stable and consistent with tight tolerances
  • Compensates the grinding wheel wear
  • Can be installed on any type of grinding machine, both new and retrofitting
  • Easy to use
  • Does not require surveillance
[/marked_list2]
]]> TG200 – Top Gauge 200 https://www.balancesystems.com/product/tg200-top-gauge-200-en/ Fri, 11 Sep 2015 15:16:47 +0000 http://balancesystems.com/prodotto/tg200-top-gauge-200/ Range of modular gauge heads for machine tools Top Gauge 200 (TG200) are modular gauging heads, designed to meet any applications that require the dimensional control on grinding machines, lapping machines and high precision lathes. The measurement method is based on the comparison with respect to a master.
Applications
  • External diameters for continuous or interrupted surfaces
  • Internal diameters for continuous or interrupted surfaces, with or without oscillation
  • Multi-diameters without mechanical re-tooling
  • Continuous or interrupted flat surfaces
  • Through feed gauge
  • Active or passive positioning
  • Thickness calibration
  • Roundness and shape analysis
Benefits
[marked_list2]
  • Accuracy
  • Sturdiness
  • Production stability
  • Versatility
  • Compatibility
  • Easy maintenance
[/marked_list2]]]>