Touch detection between grinding wheel and work piece by acoustic emission (AE) and power sensor sensors (Gap & Crash) – Balance Systems https://www.balancesystems.com Future innovation Thu, 29 Nov 2018 16:07:05 +0000 en-US hourly 1 https://wordpress.org/?v=5.2.21 VM25 https://www.balancesystems.com/product/vm25-modular-multi-function-system/ Mon, 26 Nov 2018 16:00:55 +0000 http://balancesystems.com/product/vm25-modular-multi-function-system/ Modular multi-function system for grinding machine processes The VM25 is a modular fully programmable system designed for high performances applications in grinding machines. It is able to provide solutions for: - One and two plane automatic balancing of the grinding spindle - Touch detection to control the grinding wheel-work piece and grinding wheel-dresser contacts, by using acoustic emission and/or power sensors - In-process and post-process gauging (absolute or comparative)
Features
  • Modular setup fited to the machine architecture on which it is installed
  • It is available in several configurations: table or remote control unit
  • User’s graphic interface based on ISO symbols
  • Total integration with the machine controller (commands and remote programming)
  • TCP/IP connectivity for service operations and remote diagnostic
  • It is delivered with the “VM25 Service” software application for backup, restore and software upgrade
  • Each installed function is fully independent. In case that a function is temporarily not available, it can be disabled and the remaining system can continue to operate
  • A functional upgrade can be made at any time
Benefits
[marked_list2]
  • Ergonomic and easy to setup
  • Decisive in optimizing the production process and the quality of the machine
  • Extends lifetime of the machine components (spindle, grinding wheel and dressing tool), reducing the environmental impact
  • Does not require surveillance
  • Can be installed on any type of grinding machine, both new and retrofitting
[/marked_list2]]]> VM15 https://www.balancesystems.com/product/vm15-single-and-dual-function-system/ Thu, 04 May 2017 12:58:01 +0000 Single and dual-function system for grinding machine processes VM15 is a programmable modular system designed for medium complexity applications in grinding machines, with high performances and cost effective. It is able to provide solutions for: - One-plane balancing of the grinding spindle - Touch detection to control the grinding wheel-work piece and grinding wheel-dresser contact moment, by using acoustic emission and/or power sensors - In-process gauging (comparative)
Features
  • Configuration with control unit in the electrical cabinet and remoted graphic control panel
  • User’s graphic interface based on ISO symbols
  • Each installed function is fully independent. In case that a function is temporarily not available, it can be disabled and the remaining system can continue to operate
  • TCP/IP connectivity for service operations and remote diagnostic
  • It is provided with the software application “VM15 Service” for backup, restore and software upgrade operations
  • A functional upgrade can be made at any time
Benefits
[marked_list2]
  • Ergonomic and easy to setup
  • Decisive in optimizing the production process and the quality of the machine
  • Extends lifetime of the machine components (spindle, grinding wheel and dressing tool), reducing the environmental impact
  • Does not require surveillance
  • Can be installed on any type of grinding machine, both new and retrofitting
[/marked_list2]]]>